Datasheet

1A 1Y
1 6
2A 2Y
3 4
ABSOLUTE MAXIMUM RATINGS
(1)
SN74AUC2G07
SCES443D – MAY 2003 – REVISED JUNE 2008 ............................................................................................................................................................... www.ti.com
FUNCTION TABLE
(EACH BUFFER/DRIVER)
INPUT OUTPUT
A Y
H H
L L
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range – 0.5 3.6 V
V
I
Input voltage range
(2)
– 0.5 3.6 V
V
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
– 0.5 3.6 V
V
O
Output voltage range
(2)
– 0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 – 50 mA
I
OK
Output clamp current V
O
< 0 – 50 mA
I
O
Continuous output current ± 20 mA
Continuous current through V
CC
or GND ± 100 mA
DBV package 165
θ
JA
Package thermal impedance
(3)
DCK package 259 C/W
YZP package 123
T
stg
Storage temperature range – 65 150 C
(1) Stresses beyond those listed under " absolute maximum ratings " may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under " recommended operating
conditions " is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2 Submit Documentation Feedback Copyright © 2003 – 2008, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC2G07