Datasheet

www.ti.com
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
1
2
4
A
B
Y
Absolute Maximum Ratings
(1)
SN74AUC1G08
SINGLE 2-INPUT POSITIVE-AND GATE
SCES374O – SEPTEMBER 2001 – REVISED APRIL 2007
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
This device is fully specified for partial-power-down applications using I
off
. The I
off
circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
FUNCTION TABLE
INPUTS
OUTPUT
Y
A B
H H H
L X L
X L L
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 3.6 V
V
I
Input voltage range
(2)
–0.5 3.6 V
V
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 3.6 V
V
O
Output voltage range
(2)
–0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 –50 mA
I
OK
Output clamp current V
O
< 0 –50 mA
I
O
Continuous output current ± 20 mA
Continuous current through V
CC
or GND ± 100 mA
DBV package 206
DCK package 252
θ
JA
Package thermal impedance
(3)
DRL package 142 ° C/W
DRY package 234
YZP package 132
T
stg
Storage temperature range –65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback