Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
SN74ALVCH16334
16-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
SCES090I – OCTOBER 1996 – REVISED SEPTEMBER 2004
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range -0.5 4.6 V
V
I
Input voltage range
(2)
-0.5 4.6 V
V
O
Output voltage range
(2) (3)
-0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 -50 mA
I
OK
Output clamp current V
O
< 0 -50 mA
I
O
Continuous output current ± 50 mA
Continuous current through each V
CC
or GND ± 100 mA
DGG package 89
θ
JA
Package thermal impedance
(4)
DGV package 93 ° C/W
DL package 94
T
stg
Storage temperature range -65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51.
3