Datasheet

www.ti.com
OE
CLK
Y1
1D
C1
CLK
To 17 Other Channels
LE
A1
27
30
28
54
3
Pin numbers shown are for the DGG, DGV, and DL packages.
ABSOLUTE MAXIMUM RATINGS
(1)
SN74ALVC16835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
SCES125J – FEBRUARY 1998 – REVISED NOVEMBER 2004
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range -0.5 4.6 V
V
I
Input voltage range
(2)
-0.5 4.6 V
V
O
Output voltage range
(2) (3)
-0.5 V
CC
+ 0.5 V
I
IK
Input clamp current V
I
< 0 -50 mA
I
OK
Output clamp current V
O
< 0 -50 mA
I
O
Continuous output current ± 50 mA
Continuous current through each V
CC
or GND ± 100 mA
DGG package 64
DGV package 48
θ
JA
Package thermal impedance
(4)
° C/W
DL package 56
GQL/ZQL package 42
T
stg
Storage temperature range -65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
3