Datasheet

SN54ABT8543, SN74ABT8543
SCAN TEST DEVICES WITH
OCTAL REGISTERED BUS TRANSCEIVERS
SCBS120E – AUGUST 1991 – REVISED JULY 1996
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
simultaneous PSA and PRPG (PSA/PRPG)
Data appearing at the selected device input pins is compressed into an 8-bit parallel signature in the
shift-register elements of the selected input BSCs on each rising edge of TCK. This data is updated in the
shadow latches of the selected input BSCs and applied to the inputs of the normal on-chip logic. At the same
time, an 8-bit pseudo-random pattern is generated in the shift-register elements of the selected output BSCs
on each rising edge of TCK, updated in the shadow latches, and applied to the associated device output pins
on each falling edge of TCK. Figures 8 and 9 show the 8-bit linear-feedback shift-register algorithms through
which the signature and patterns are generated. An initial seed value should be scanned into the BSR before
performing this operation. A seed value of all zeroes does not produce additional patterns.
=
=
MASKX
A8-I
B8-O
A7-I A6-I A5-I A4-I A3-I A2-I A1-I
B7-O B6-O B5-O B4-O B3-O B2-O B1-O
Figure 8. 8-Bit PSA/PRPG Configuration (OEA = 0, OEB = 1)
=
=
MASKX
B8-I
A8-O
B7-I B6-I B5-I B4-I B3-I B2-I B1-I
A7-O A6-O A5-O A4-O A3-O A2-O A1-O
Figure 9. 8-Bit PSA/PRPG Configuration (OEA = 1, OEB = 0)