Datasheet

Converts WL Voltage Levels to MOS
Levels
SN54LS07 . . . J PACKAGE
SN74LS07 . . . D OR N PACKAGE
(TOP VIEW)
High Sink-Current Capability
Input Clamping Diodes Simplify System
Design
Open-Collector Driver for Indlcator Lamps
and Relays
Package Options Include Standard Plastic
(N) and Ceramic (J) 300-mil Dual-In-Line
Packages, Plastic Small Outline (D) and
Ceramic Chip Carrier (FK) Package
SN54LS07 . . . FK PACKAGE
description
(TOP VIEW)
These monolithic hex buffers/drivers feature
high-voltage open-collector Outputs to
interface with high-level circuits or for driving
high-current loads. They are also charac-
terized for use as buffers for driving TTL
inputs. The ‘LS07 has a rated output voltage
of 30 V. The maximum sink current is 30 mA
for the SN54LS07 and 40 mA for the
SN74LS07.
These circuits are compatible with most TTL
families. Input are diode-clamped to minimize
transmission-line effects, which simplifies
design. Typical power dissipation is 140 mW
and average propagation delay time is 12 ns.
NC - No internal connection
The SN54LS07 is characterized over the full military temperature range of -55°C to 125°C
The SN74LS07 is characterized for Operation from 0°C to 70°C.
logic diagram (positive loglc)
logic symbolt
1A
1Y
2A
2Y
3A
3Y
4A
4Y
5A
SY
6A
6Y
t This Symbol is in accordance with ANSIIIEEE Std 91-1984 and IEC
Publication 617-12.
Pin numbers shown are for D, J, and N packages.