Datasheet

SN65MLVD200, SN65MLVD202
SN65MLVD204, SN65MLVD205
MULTIPOINT–LVDS LINE DRIVERS AND RECEIVERS
SLLS463E – SEPTEMBER 2001 – REVISED JUNE 2003
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
Table 1. Type-1 Receiver Input Threshold Test Voltages
APPLIED VOLTAGES
RESULTING DIFFERENTIAL
INPUT VOLTAGE
RESULTING COMMON-
MODE INPUT VOLTAGE
RECEIVER OUTPUT
V
A
V
B
V
ID
V
CM
V
O
3.425 V 3.375 V 50 mV 3.4 V H
3.375 V 3.425 V –50 mV 3.4 V L
–0.975 V –1.025 V 50 mV –1.0 V H
–1.025 V –0.975 V –50 mV –1.0 V L
3.800 V 3.000 V 800 mV 3.4 V H
3.000 V 3.800 V –800 mV 3.4 V L
–0.600 V –1.400 V 800 mV –1.0 V H
–1.400 V –0.600 V –800 mV –1.0 V L
NOTE: H= high level, L = low level. Output state assumes receiver is enabled (RE is Low).
Table 2. Type-2 Receiver Input Threshold Test Voltages
APPLIED VOLTAGES
RESULTING DIFFERENTIAL
INPUT VOLTAGE
RESULTING COMMON–
MODE INPUT VOLTAGE
RECEIVER OUTPUT
V
A
V
B
V
ID
V
CM
V
O
3.475 V 3.325 V 150 mV 3.4 V H
3.425 V 3.375 V 50 mV 3.4 V L
–0.925 V –1.075 V 150 mV –1.0 V H
–0.975 V –1.025 V 50 mV –1.0 V L
3.800 V 3.000 V 800 mV 3.4 V H
3.000 V 3.800 V –800 mV 3.4 V L
–0.600 V –1.400 V 800 mV –1.0 V H
–1.400 V –0.600 V –800 mV –1.0 V L
NOTE: H= high level, L = low level. Output state assumes receiver is enabled (RE is Low).