Datasheet
www.ti.com
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATING TABLE
RECOMMENDED OPERATING CONDITIONS
SN65LVDS348 , SN65LVDT348
SN65LVDS352 , SN65LVDT352
SLLS523E – FEBRUARY 2002 – REVISED MAY 2004
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
Supply voltage range
(2)
, V
CC
,V
CCA
,V
CCD1
, and V
CCD2
-0.5 V TO 4 V
Enables, R
OUT
, or Y -0.5 V to 6 V
Voltage range Differential input magnitude MV
ID
M (LVDT only) 1 V
R
IN+
, R
IN-
, A or B -5 V to 6 V
Human body model
(3)
A, B, R
IN+
, R
IN-
and GND ±15 kV
Electrostatic discharge All pins ±7 kV
Charged-device model
(4)
All pins ±500 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range -65°C to 150°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal (GND, AGND).
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(4) Tested in accordance with JEDEC Standard 22, Test Method C101.
T
A
≤ 25°C OPERATING FACTOR
(1)
T
A
= 85°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING
D16 950 mW 7.6 mW/°C 494 mW
PW16 774 mW 6.2 mW/°C 402 mW
PW24 1087 mW 8.7 mW/°C 565 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air
flow.
MIN NOM MAX UNIT
V
CC
,V
CCA
,V
CCD1
,
Supply voltage 3 3.3 3.6 V
and V
CCD2
V
IH
High-level input voltage Enables 2 5 V
V
IL
Low-level input voltage Enables 0 0.8 V
|V
ID
| (LVDT348, 352) 0.1 0.8
Magnitude of differential
V
input voltage
|V
ID
| (LVDS348, 352) 0.1 3
Input voltage (any combination of common mode or input signals) -4 5 V
T
A
Operating free-air temperature -40 85 °C
5
Submit Documentation Feedback