Datasheet
SN65LVDS95
SLLS297J –MAY 1998– REVISED MAY 2011
www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
V
CC
Supply voltage range
(2)
–0.5 V to 4 V
V
O
Voltage range at any output terminal –0.5 V to V
CC
+ 0.5 V
V
I
Voltage range at any input terminal –0.5 V to 5.5 V
Bus pins (Class 3A) 6 KV
Bus pins (Class 2B) 400 V
Electrostatic discharge
(3)
All pins (Class 3A) 6 KV
All pins (Class 2B) 200 V
Continuous total power dissipation See Dissipation Rating Table
T
A
Operating free-air temperature range –40°C to 85°C
T
stg
Storage temperature range –65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to the GND terminals.
(3) This rating is measured using MIL-STD-883C Method, 3015.7.
DISSIPATION RATING TABLE
T
A
≤ 25°C DERATING FACTOR
(1)
T
A
= 70°C T
A
= 85°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING POWER RATING
DGG 1316 mW 13.1 mW/°C 724 mW 526 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air
flow.
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage 2 V
V
IL
Low-level input voltage 0.8 V
Z
L
Differential load impedance 90 132 Ω
T
A
Operating free-air temperature 40 85 °C
4 Copyright © 1998–2011, Texas Instruments Incorporated