Datasheet

ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATING TABLE
RECOMMENDED OPERATING CONDITIONS
SN65LVDS93
SLLS302G – MAY 1998 – REVISED MAY 2009 ................................................................................................................................................................. www.ti.com
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
V
CC
Supply voltage range
(2)
– 0.5 V to 4 V
V
O
Voltage range at any output terminal -0.5 V to V
CC
+ 0.5 V
V
I
Voltage range at any input terminal – 0.5 V to 5.5 V
Bus Pins (Class 3A) 6 KV
Bus Pins (Class 2B) 400 V
Electrostatic discharge
(3)
Bus Pins (Class 2A) 6 KV
Bus Pins (Class 2B) 200 V
Continuous total power dissipation See Dissipation Rating Table
T
A
Operating free-air temperature range – 40 ° C to 85 ° C
T
stg
Storage temperature range – 65 ° C to 150 ° C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to the GND terminals.
(3) This rating is measured using MIL-STD-883C Method, 3015.7.
T
A
≤ 25 ° C DERATING FACTOR
(1)
T
A
= 70 ° C T
A
= 85 ° C
PACKAGE
POWER RATING ABOVE T
A
= 25 ° C POWER RATING POWER RATING
DGG 1377 mW 11 mW/ ° C 882 mW 717 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air
flow.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage 2 V
V
IL
Low-level input voltage 0.8 V
Z
L
Differential load impedance 90 132 Ω
T
A
Operating free-air temperature – 40 85 ° C
4 Submit Documentation Feedback Copyright © 1998 – 2009, Texas Instruments Incorporated
Product Folder Link(s) :SN65LVDS93