Datasheet

2-1
The Evaluation Boards
The Evaluation Boards
Each EVM consists of a six-layer printed-wiring board (PWB). The LVDS
device and BergStick connectors are on the top (connector side) of the
board. All other passive components are installed on the underside
(component side) of the PWB. A simplified input/output (I/O) block diagram of
the EVM is shown in Figure 2–1.
Topic Page
2.1 SN65LVDS387 16-Channel LVDS Line Driver 2-3. . . . . . . . . . . . . . . . . . . .
2.2 SN65LVDS386 16-Channel LVDS Line Receiver 2-5. . . . . . . . . . . . . . . . . .
Chapter 2