Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATING TABLE
RECOMMENDED OPERATING CONDITIONS
SN65LVDS32B , , SN65LVDT32B
SN65LVDS3486B , SN65LVDT3486B
SN65LVDS9637B , SN65LVDT9637B
SLLS440B – OCTOBER 2000 – REVISED APRIL 2007
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
V
CC
Supply voltage range
(2)
–0.5 V to 4 V
Enables or Y –0.5 V to V
CC
+ 3 V
Voltage range A or B –4 V to 6 V
|V
A
– V
B
| (LVDT) 1 V
Electrostatic discharge: A, B, and GND
(3)
Class 3, A: 15 kV, B: 600 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range –65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with MIL-STD-883C Method 3015.7.
T
A
≤ 25°C OPERATING FACTOR
(1)
T
A
= 85°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING
D8 725 mW 5.8 mW/°C 377 mW
D16 950 mW 7.6 mW/°C 494 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air
flow.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage Enables 2 V
V
IL
Low-level input voltage Enables 0.8 V
LVDS 0.1 3 V
| V
ID
| Magnitude of differential input voltage
LVDT 0.8 V
V
I
or V
IC
Voltage at any bus terminal (separately or common-mode) –2 4.4 V
T
A
Operating free-air temperature –40 85 °C
5
Submit Documentation Feedback