Datasheet

www.ti.com
EQUIVALENT INPUT AND OUTPUT SCHEMATIC DIAGRAMS
V
CC
S0, S1
Input
50 Ω
300 kΩ
7 V
V
CC
1DE, 2DE
Input
50 Ω
300 kΩ
7 V
V
CC
300 kΩ 300 kΩ
7 V7 V
A Input B Input
V
CC
7 V
Y or Z
Output
5 Ω
10 kΩ
ABSOLUTE MAXIMUM RATINGS
SN65LVDS22
SN65LVDM22
SLLS315C – DECEMBER 1998 – REVISED JUNE 2002
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
Supply voltage range, V
CC
(see Note
(2)
) –0.5 V to 4 V
(DE, S0, S1) –0.5 V to 6 V
Voltage range
(Y, Z, A, and B) –0.5 V to 4 V
A, B, Y, Z and GND (see Note
(3)
) Class 3, A:12 kV, B:600 V
Electrostatic discharge
All pins Class 3, A:5 kV, B:500 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range –65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with MIL-STD-883C Method 3015.7.
3
Submit Documentation Feedback