Datasheet

SN65LVDS180-Q1
SN65LVDS050-Q1
SN65LVDS051-Q1
SGLS204C –SEPTEMBER 2003–REVISED MARCH 2013 www.ti.com
It is only under these conditions that the output of the receiver will be valid with less than a 100-mV differential
input voltage magnitude. The presence of the termination resistor, R
t
, does not affect the fail-safe function as
long as it is connected as shown in the figure. Other termination circuits may allow a dc current to ground that
could defeat the pullup currents from the receiver and the fail-safe feature.
spacer
16 Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: SN65LVDS180-Q1 SN65LVDS050-Q1 SN65LVDS051-Q1