Datasheet

www.ti.com
Absolute Maximum Ratings
(1)
Dissipation Ratings Table
Recommended Operating Conditions
2.4 *
Ť
V
ID
Ť
2
Ť
V
ID
Ť
2
SN65LVDS179-EP , , SN65LVDS180-EP
SN65LVDS050-EP , SN65LVDS051-EP
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS
SGLS203B SEPTEMBER 2003 REVISED JANUARY 2007
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range
(2)
–0.5 4 V
D, R, DE, and RE –0.5 6
Voltage range V
Y, Z, A, and B –0.5 4
Y, Z, A, B, and GND
(3)
Class 3, A: 12 kV, B: 600 V
Electrostatic discharge
All Class 3, A: 7 kV, B: 500 V
See Dissipation Rating
Continuous power dissipation
Table
Storage temperature range 65 150 ° C
Lead temperature 1,6 mm (1/16 in) from case for 10 s 250 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages are with respect to network ground terminal.
(3) Tested in accordance with MIL-STD-883C Method 3015.7
DERATING
T
A
25 ° C FACTOR T
A
= 85 ° C T
A
= 125 ° C
PACKAGE
POWER RATING ABOVE T
A
= POWER RATING POWER RATING
25 ° C
(1)
DGK 424 mW 3.4 mW/ ° C 220 mW 84mW
PW(14) 736mw 5.9 mW/°C 383 mW 146mW
PW(16) 839mw 6.7 mW/°C 437 mW 169mW
D(8) 635mw 5.1 mW/°C 330 mW 125mW
D(14) 987mw 7.9 mW/°C 513 mW 197mW
D(16) 1110mw 8.9 mW/°C 577 mW 220mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board mounted and with no air
flow.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage 2 V
V
IL
Low-level input voltage 0.8 V
|V
ID
| Magnitude of differential input voltage 0.1 0.6 V
|V
OD(dis)
| Magnitude of differential output voltage with disabled driver 520 mV
V
OY
or V
OZ
Driver output voltage 0 2.4 V
V
IC
Common-mode input voltage (see Figure 5 ) V
V
CC
0.8
T
A
Operating free-air temperature
(1)
–55 125 ° C
(1) Long term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of
overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging
5
Submit Documentation Feedback