Datasheet
www.ti.com
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
PACKAGE DISSIPATION RATINGS
SN65LVDS122
SN65LVDT122
SLLS525B – MAY 2002 – REVISED JUNE 2004
These devices have limited built-in ESD protection. The leads should be shorted together or the device
placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
PACKAGE TERMINATION RESISTOR PART NUMBER
(1)
SYMBOLIZATION
SOIC No SN65LVDS122D LVDS122
SOIC Yes SN65LVDT122D LVDT122
TSSOP No SN65LVDS122PW LVDS122
TSSOP Yes SN65LVDT122PW LVDT122
(1) Add the suffix R for taped and reeled carrier
over operating free-air temperature range unless otherwise noted
(1)
SN65LVDS122, SN65LVDT122
V
CC
Supply voltage range
(2)
–0.5 V to 4 V
(A, B) –0.7 V to 4.3 V
|V
A
-V
B
| (LVDT only) 1 V
Voltage range
(DE, S0, S1) –0.5 V to 4 V
(Y, Z) –0.5 V to 4 V
A, B, Y, Z, and GND ±4 kV
Human Body Model
(3)
ESD All pins ±2 kV
Charged-Device Model
(4)
All pins ±1500 V
Continuous power dissipation See Dissipation Rating Table
T
stg
Storage temperature range –65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.7.
(4) Tested in accordance with JEDEC Standard 22, Test Method C101.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage S0, S1, 1DE, 2DE 2 4 V
V
IL
Low-level input voltage S0, S1, 1DE, 2DE 0 0.8 V
LVDS 0.1 1
|V
ID
| Magnitude of differential input voltage V
LVDT 0.1 0.8
Input voltage (any combination of common-mode or input signals) 0 4 V
T
A
Operating free-air temperature –40 85 °C
T
A
≤ 25°C DERATING FACTOR
(1)
T
A
= 85°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING
PW 712 mW 6.2 mW/°C 340 mW
D 1002 mW 8.7 mW/°C 480 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air flow.
2