Datasheet

PACKAGE OPTION ADDENDUM
31 – January – 2011
A
ddendum Page 3
PACKAGE INFORMATION
Orderable Device Status (1) Pkg
Type
Pkg
Drawing
Pins Pkg
Qty
Eco Plan (2) Lead/ Ball
Finish
MSL Peak Temp (3)
SN65LVDS108DBT ACTIVE TSSOP DBT 38 50
Green (RoHS &
no Sb/ Br)
CU NIPDAU Level-2-260C-UNLIM
SN65LVDS108DBTG4 ACTIVE TSSOP DBT 38 50
Green (RoHS &
no Sb/ Br)
CU NIPDAU Level-2-260C-UNLIM
SN65LVDS108DBTR ACTIVE TSSOP DBT 38 2000
Green (RoHS &
no Sb/ Br)
CU NIPDAU Level-2-260C-UNLIM
SN65LVDS108DBTRG4 ACTIVE TSSOP DBT 38 2000
Green (RoHS &
no Sb/ Br)
CU NIPDAU Level-2-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a
new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan -The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) -please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for
all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at
high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and lead frame. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. --The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications and peak solder
temperature.
Important Information and Disclaimer: The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy
of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps
to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials
and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not
be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.