Datasheet

www.ti.com
EQUIVALENT INPUT AND OUTPUT SCHEMATIC DIAGRAMS
50 Ω
300 kΩ
V
CC
7 V
G, G
or
A Input
50 Ω
V
CC
7 V
Y or Z
Output
10 kΩ
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
SN65LVDM31
SLLS417C – MARCH 2000 – REVISED MAY 2001
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
Supply voltage range V
CC
(2)
–0.5 V to 4 V
Inputs –0.5 V to 6 V
Input voltage range
Y or Z –0.5 V to 4 V
Electrostatic discharge
(3)
: Y, Z, and GND Class 3, A:12 kV, B:600 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range –65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with MIL-STD-883C Method 3015.7.
DISSIPATION RATING TABLE
T
A
≤ 25°C OPERATING FACTOR
(1)
T
A
= 85°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING
D 950 mW 7.6 mW/°C 494 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air
flow.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage 2.0 V
V
IL
Low-level input voltage 0.8 V
T
A
Operating free-air temperature 40 85 °C
2
Submit Documentation Feedback