Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATING TABLE
RECOMMENDED OPERATING CONDITIONS
2.4 –
Ť
V
ID
Ť
2
Ť
V
ID
Ť
2
SN65LVDM1676
SN65LVDM1677
SLLS430D – NOVEMBER 2000 – REVISED JUNE 2007
over operating free-air temperature range (unless otherwise noted)
(1) (2)
RATING
V
CC
Supply voltage range –0.5 V to 4 V
A, TX/ RX –0.5 V to 6 V
V
I
Input voltage range
Y or Z –0.5 V to 4 V
|V
ID
| Differential input voltage magnitude, (SN65LVDM1677 only) 1 V
I
O
Receiver output current ± 20 mA
P
D
Continuous power dissipation See the Dissipation Rating Table
Y, Z, and GND Class 3, A: 8 kV, B: 600 V
ESD Electrostatic discharge
(3)
All Pins Class 3, A: 7 kV, B: 500 V
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with MIL-STD-883C Method 3015.7.
T
A
≤ 25 ° C DERATING FACTOR
(1)
T
A
= 85 ° C
PACKAGE
POWER RATING ABOVE T
A
= 25 ° C POWER RATING
DGG 2094 mW 16.7 mW/ ° C 1089 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board mounted and with no air
flow.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6
V
IH
High-level input voltage 2
V
IL
Low-level input voltage 0.8
V
|V
ID
| Magnitude of differential input voltage 0.1 0.6
V
IC
Common-mode input voltage
V
CC
–0.8 V
I
OL
Receiver low-level output current 8
mA
I
OH
Receiver high-level output current –8
(1)
T
A
Operating free-air temperature –40 85 ° C
(1) The algebraic convention in which the least positive (most negative) limit is designated as minimum is used in this data sheet.
5
Submit Documentation Feedback