Datasheet

PWD#

GAIN

EQ_MODE/ADD2

EQ1/ADD1

EQ0/ADD0

VOD/CS

I2C_EN

DRV_PK#/SCL

JMP8

www.ti.com

Test Setup

Figure 3. SN65LVCP1414 EVM Jumper Description

5 Test Setup

The EVM gives the developer two control interface options for operation, I

C or GPIO mode. Input and

output differential pairs are available through edge-launch SMAs with approximately 2.5 inches of trace

with Rogers Low–Dielectric material with 0.1-µF AC coupling capacitors. Apply power to the device, VCC,

using banana jacks (P1, P2).

SLLU169–July 20112 SN65LVCP1414 Evaluation Module (EVM)

Submit Documentation Feedback