Datasheet

SN65HVD72
SN65HVD75
SN65HVD78
SLLSE11C –MARCH 2012–REVISED SEPTEMBER 2013 www.ti.com
REVISION HISTORY
Changes from Original (March 2012) to Revision A Page
• Changed the Switching Characteristics condition statement From: 15 kbps devices (HVD73, 74, 75) bit time > 65 ns
To: 20 Mbps devices (HVD73, 74, 75) bit time > 50 ns ....................................................................................................... 5
• Changed the Switching Characteristics condition statement From: 50 kbps devices (HVD76, 77, 78) bit time > 20 ns
To: 50 Mbps devices (HVD76, 77, 78) bit time > 20 ns ....................................................................................................... 6
• Added Figure 12 to TYPICAL CHARACTERISTICS. ......................................................................................................... 10
• Added Figure 13 to TYPICAL CHARACTERISTICS. ......................................................................................................... 10
• Added Figure 14 to TYPICAL CHARACTERISTICS. ......................................................................................................... 10
• Added Figure 15 to TYPICAL CHARACTERISTICS. ......................................................................................................... 10
• Added Figure 16 to TYPICAL CHARACTERISTICS. ......................................................................................................... 10
• Added Figure 17 to TYPICAL CHARACTERISTICS. ......................................................................................................... 11
• Added VALUEs to the Thermal Characteristics table in the DEVICE INFORMATION section. ......................................... 12
• Added APPLICATION INFORMATION section to data sheet. ........................................................................................... 14
Changes from Revision A (May 2012) to Revision B Page
• Added the SON-8 package and Nodes column to Table 1, ................................................................................................. 1
• Changed the SN65HVD72, 75, 78 Logic Diagram ............................................................................................................... 1
• Changed the Voltage range at A or B Inputs MIN value From: –8 V To: –13 V .................................................................. 3
• Added foot note for free-air temperature to the RECOMMENDED OPERATING CONDITIONS table ............................... 3
• Changed the Bus input current (disabled driver) TYP values for HVD78 V
I
= 12 V From: 150 To: 240 and V
I
= –7 V
From: –120 To: –180 ............................................................................................................................................................ 4
• Added TYP values to the SWITCHING CHARACTERISTICS table .................................................................................... 5
• Added TYP values to the SWITCHING CHARACTERISTICS table .................................................................................... 6
• Changed Table 4, Thermal Information .............................................................................................................................. 12
• Changed Table 5, Thermal Characteristics ........................................................................................................................ 12
• Added section: LOW-POWER STANDBY MODE .............................................................................................................. 13
Changes from Revision B (June 2012) to Revision C Page
• Deleted Feature: > ±12kV IEC61000-4-2 Air-Gap Discharge ............................................................................................... 1
• Added the DGK package to the SN65HVD72, 75, 78 Logic Diagram .................................................................................. 1
• Added Footnote 2 to the ABSOLUTE MAXIMUM RATINGS table ...................................................................................... 3
• Changed the SWITCHING CHARACTERISTICS conditions statement From: 250 kbps devices (HVD70, 71, 72) bit
time > 4 µs To: 250 kbps device (HVD72) bit time ≥ 4 µs .................................................................................................... 5
• Changed the SWITCHING CHARACTERISTICS conditions statement From: 250 kbps devices (HVD73, 74, 75) bit
time > 50 ns To: 250 kbps device (HVD75) bit time ≥ 50 ns ................................................................................................ 5
• Changed the SWITCHING CHARACTERISTICS conditions statement From: 250 kbps devices (HVD76, 77, 78)bit
time > 20 ns To: 250 kbps device (HVD78) bit time ≥ 20 ns ................................................................................................ 6
• Added note : R
L
= 54 Ω to Figure 14, Figure 15, and Figure 16 ........................................................................................ 10
• Replaced the LOW-POWER STANDBY MODE section .................................................................................................... 13
• Added text to the Transient Protection section ................................................................................................................... 15
18 Submit Documentation Feedback Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: SN65HVD72 SN65HVD75 SN65HVD78