Datasheet

www.ti.com

EVM Setup and Operation

Figure 7. Rx Channel Evaluation: 160mVpp input at RXIN

11. Change the input amplitude to 80mVpp.

12. Example waveforms with an 80mVpp sine wave input at J1 are shown in Figure 8. RXOUT is high and

DIR is low indicating the device is not in Receive mode.

Figure 8. Rx Channel Evaluation: 80mVpp input at RXIN

SLLU152–December 2012 SN65HVD62 AISG On-Off Keying Modem Evaluation Module (EVM)

Submit Documentation Feedback