Datasheet

SN65HVD30 – SN65HVD35
SLLS665I –SEPTEMBER 2005–REVISED APRIL 2010 www.ti.com
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range unless otherwise noted
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.6
V
V
I
or V
IC
Voltage at any bus terminal (separately or common mode) –7
(1)
12
SN65HVD30, SN65HVD33 26
1/t
UI
Signaling rate SN65HVD31, SN65HVD34 5 Mbps
SN65HVD32, SN65HVD35 1
R
L
Differential load resistance 54 60 Ω
V
IH
High-level input voltage D, DE, RE 2 V
CC
V
IL
Low-level input voltage D, DE, RE 0 0.8 V
V
ID
Differential input voltage –12 12
Driver –60
I
OH
High-level output current mA
Receiver –8
Driver 60
I
OL
Low-level output current mA
Receiver 8
T
J
Junction temperature –40 150 °C
(1) The algebraic convention, in which the least positive (most negative) limit is designated as minimum is used in this data sheet.
ELECTROSTATIC DISCHARGE PROTECTION
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
Human body model Bus terminals and GND ±16
Human body model
(2)
All pins ±4 kV
Charged-device-model
(3)
All pins ±1
(1) All typical values at 25°C with 3.3-V supply.
(2) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(3) Tested in accordance with JEDEC Standard 22, Test Method C101.
4 Submit Documentation Feedback Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s) :SN65HVD30 – SN65HVD35