Datasheet

Rs = 10 k
Rs = 100 k
Rs = 0
STANDBY
SN65HVD233
SN65HVD234
SN65HVD235
www.ti.com
.............................................................................................................................................. SLLS557F NOVEMBER 2002 REVISED AUGUST 2008
Figure 32. Typical SN65HVD233 250-kbps Output Pulse Waveforms With Slope Control
If a high-level input (> 0.75 V
CC
) is applied to Rs (pin 8), the circuit enters a low-current, listen only standby mode
during which the driver is switched off and the receiver remains active. The local controller can reverse this
low-power standby mode when the rising edge of a dominant state (bus differential voltage >900 mV typical)
occurs on the bus.
Copyright © 2002 2008, Texas Instruments Incorporated Submit Documentation Feedback 23
Product Folder Link(s): SN65HVD233 SN65HVD234 SN65HVD235