Datasheet

Rs = 10 k
Ω
Rs = 100 k
Ω
Rs = 0
Ω
SN65HVD233-HT
SLLS933F –NOVEMBER 2008–REVISED AUGUST 2012 www.ti.com
Figure 30. Typical SN65HVD233 250-kbps Output Pulse Waveforms With Slope Control
STANDBY
If a high-level input (>0.75 V
CC
) is applied to R
s
, the circuit enters a low-current, listen-only standby mode, during
which the driver is switched off and the receiver remains active. The local controller can reverse this low-power
standby mode when the rising edge of a dominant state (bus differential voltage >900 mV typical) occurs on the
bus.
24 Submit Documentation Feedback Copyright © 2008–2012, Texas Instruments Incorporated
Product Folder Links: SN65HVD233-HT