Datasheet
SN65HVD233-HT
www.ti.com
SLLS933F –NOVEMBER 2008–REVISED AUGUST 2012
RECEIVER SWITCHING CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
T
A
= –55°C to 125°C T
A
= 175°C
(1)
T
A
= 210°C
(2)
PARAMETER TEST CONDITIONS UNIT
MIN TYP MAX MIN TYP MAX MIN TYP MAX
Propagation delay time, low-to-
t
PLH
35 60 50 60 50 60 ns
high-level output
Propagation delay time, high-
t
PHL
35 60 45 60 45 60 ns
to-low-level output
See Figure 7
t
sk(p)
Pulse skew (|t
PHL
– t
PLH
|) 7 5 5 ns
t
r
Output signal rise time 2 6.5 6.5 8 6.5 8 ns
t
f
Output signal fall time 2 6.5 6.5 9 6.5 9 ns
(1) Minimum and maximum parameters are characterized for operation at T
A
= 210°C but not production tested at T
A
= 175°C or 210°C.
(2) Minimum and maximum parameters are characterized for operation at T
A
= 210°C but may not be production tested at that temperature.
Production test limits with statistical guardbands are used to ensure high temperature performance.
DEVICE SWITCHING CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
T
A
= –55°C to 125°C T
A
= 175°C
(1)
T
A
= 210°C
(2)
PARAMETER TEST CONDITIONS UNIT
MIN TYP MAX MIN TYP MAX MIN TYP MAX
Loopback delay,
t
(LBK)
driver input to See Figure 12 7.5 15 12 15 12 15 ns
receiver output
R
S
= 0 V, See Figure 11 70 135 90 135 90 135
Total loop delay,
driver input to R
S
with 10 kΩ to ground,
105 190 115 190 115 190
t
(loop1)
receiver output, See Figure 11 ns
recessive to
R
S
with 100 kΩ to ground,
535 1000 430 1000 430 1000
dominant
See Figure 11
R
S
= 0 V, See Figure 11 70 135 98 135 98 135
Total loop delay,
driver input to R
S
with 10 kΩ to ground,
105 190 150 190 150 190
t
(loop2)
receiver output, See Figure 11 ns
dominant to
R
S
with 100 kΩ to ground,
535 1100 880 1200 880 1200
recessive
See Figure 11
(1) Minimum and maximum parameters are characterized for operation at T
A
= 210°C but not production tested at T
A
= 175°C or 210°C.
(2) Minimum and maximum parameters are characterized for operation at T
A
= 210°C but may not be production tested at that temperature.
Production test limits with statistical guardbands are used to ensure high temperature performance.
Copyright © 2008–2012, Texas Instruments Incorporated Submit Documentation Feedback 11
Product Folder Links: SN65HVD233-HT