Datasheet

SN65HVD230
SN65HVD231
SN65HVD232
SLOS346K –MARCH 2001– REVISED FEBRUARY 2011 www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1) (2)
UNIT
Supply voltage range, V
CC
-0.3 V to 6 V
Voltage range at any bus terminal (CANH or CANL) -4 V to 16 V
Voltage input range, transient pulse, CANH and CANL, through 100 Ω (see Figure 7) -25 V to 25 V
Input voltage range, V
I
(D or R) -0.5 V to V
CC
+ 0.5 V
Receiver output current, I
O
±11 mA
CANH, CANL and GND 16 kV
Human body model
(3)
Electrostatic discharge All Pins 4 kV
Charged-device model
(4)
All pins 1 kV
Continuous total power dissipation See the Thermal Information Table
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods amy affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(4) Tested in accordance with JEDEC Standard 22, Test Method C101.
THERMAL INFORMATION
SN65HVD230 SN65HVD231 SN65HVD232
THERMAL METRIC
(1)
UNITS
D (8 Pins) D (8 Pins) D (8 Pins)
θ
JA
Junction-to-ambient thermal resistance 76.8 101.5 101.5
θ
JCtop
Junction-to-case (top) thermal resistance 33.4 43.3 43.3
θ
JB
Junction-to-board thermal resistance 15.3 42.2 42.4
°C/W
ψ
JT
Junction-to-top characterization parameter 1.4 4.8 4.8
ψ
JB
Junction-to-board characterization parameter 14.9 41.8 41.8
θ
JCbot
Junction-to-case (bottom) thermal resistance n/a n/a n/a
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
Supply voltage, V
CC
3 3.6 V
Voltage at any bus terminal (common mode) V
IC
-2
(1)
7 V
Voltage at any bus terminal (separately) V
I
-2.5 7.5 V
High-level input voltage, V
IH
D, R 2 V
Low-level input voltage, V
IL
D, R 0.8 V
Differential input voltage, V
ID
(see Figure 5) -6 6 V
Input voltage, V
(Rs)
0 V
CC
V
Input voltage for standby or sleep, V
(Rs)
0.75 V
CC
V
CC
V
Wave-shaping resistance, Rs 0 100 kΩ
Driver -40
High-level output current, I
OH
mA
Receiver -8
Driver 48
Low-level output current, I
OL
mA
Receiver 8
Operating free-air temperature, T
A
-40 85 °C
(1) The algebraic convention, in which the least positive (most negative) limit is designated as minimum is used in this data sheet.
6 Submit Documentation Feedback © 2001–2011, Texas Instruments Incorporated
Product Folder Link(s): SN65HVD230 SN65HVD231 SN65HVD232