Datasheet

www.ti.com
DRIVER SWITCHING CHARACTERISTICS
SN65HVD10-EP , , SN65HVD11-EP
SN65HVD12-EP
SGLS278E – DECEMBER 2004 – REVISED SEPTEMBER 2007
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
HVD10 5 8.5 16
t
PLH
Propagation delay time, low-to-high level output HVD11 18 25 40 ns
HVD12 135 200 330
HVD10 5 8.5 16
t
PHL
Propagation delay time, high-to-low level output HVD11 18 25 40 ns
HVD12 135 200 330
HVD10 3 4.5 11.5
R
L
= 54 Ω , C
L
= 50 pF,
t
r
Differential output signal rise time HVD11 10 20 30 ns
See Figure 5
HVD12 100 170 330
HVD10 3 4.5 11.5
t
f
Differential output signal fall time HVD11 10 20 30 ns
HVD12 100 170 330
HVD10 1.5
t
sk(p)
Pulse skew (|t
PHL
- t
PLH
|) HVD11 2.5 ns
HVD12 9
HVD10 6
t
sk(pp)
(2)
Part-to-part skew HVD11 11 ns
HVD12 100
HVD10 33
Propagation delay time, high impedance-to-high
t
PZH
HVD11 55 ns
level output
HVD12 320
R
L
= 110 Ω , RE at 0 V,
See Figure 6
HVD10 26
Propagation delay time, high
t
PHZ
HVD11 55 ns
level-to-high-impedance output
HVD12 320
HVD10 26
Propagation delay time, high
t
PZL
HVD11 55 ns
impedance-to-low-level output
HVD12 320
R
L
= 110 Ω , RE at 0 V,
See Figure 7
HVD10 26
Propagation delay time, low
t
PLZ
HVD11 75 ns
level-to-high-impedance output
HVD12 420
I and
6
Propagation delay time, standby-to-high-level R
L
= 110 Ω , RE at 3 V,
Q-temp
t
PZH
μ s
output See Figure 6
M-temp 14
I and
6
Propagation delay time, standby-to-low-level R
L
= 110 Ω , RE at 3 V,
Q-temp
t
PZL
μ s
output See Figure 7
M-temp 14
(1) All typical values are at 25 ° C and with a 3.3 V supply.
(2) t
sk(pp)
is the magnitude of the difference in propagation delay times between any specified terminals of two devices when both devices
operate with the same supply voltages, at the same temperature, and have identical packages and test circuits.
6 Submit Documentation Feedback Copyright © 2004 – 2007, Texas Instruments Incorporated
Product Folder Link(s): SN65HVD10-EP SN65HVD11-EP SN65HVD12-EP