Datasheet
SN65HVD1050-Q1
www.ti.com
SLLS696C –MAY 2006–REVISED DECEMBER 2010
RECEIVER ELECTRICAL CHARACTERISTICS
over recommended operating conditions including operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(1)
MAX UNIT
V
IT+
Positive-going input threshold voltage S at 0 V, See Table 3 800 900 mV
V
IT–
Negative-going input threshold voltage S at 0 V, See Table 3 500 650 mV
V
hys
Hysteresis voltage (V
IT+
– V
IT–
) 100 125 mV
V
OH
High-level output voltage I
O
= –2 mA, See Figure 6 4 4.6 V
V
OL
Low-level output voltage I
O
= 2 mA, See Figure 6 0.2 0.4 V
CANH or CANL = 5 V,
I
I(off)
Power-off bus input current Other pin at 0 V, 165 250 mA
V
CC
at 0 V, TXD at 0 V
I
O(off)
Power-off RXD leakage current V
CC
at 0 V, RXD at 5 V 20 mA
TXD at 3 V,
C
I
Input capacitance to ground (CANH or CANL) 13 pF
V
I
= 0.4 sin (4E6pt) + 2.5 V
C
ID
Differential input capacitance TXD at 3 V, V
I
= 0.4 sin (4E6pt) 5 pF
R
ID
Differential input resistance TXD at 3 V, S at 0 V 30 80 kΩ
R
IN
Input resistance (CANH or CANL) TXD at 3 V, S at 0 V 15 30 40 kΩ
Input resistance matching
R
I(m)
V
(CANH)
= V
(CANL)
–3 0 3 %
[1 – (R
IN (CANH)
/ R
IN (CANL)
)] × 100%
(1) All typical values are at 25°C with a 5-V supply.
RECEIVER SWITCHING CHARACTERISTICS
over recommended operating conditions including operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
t
PLH
Propagation delay time, low-to-high-level output 60 100 130 ns
t
PHL
Propagation delay time, high-to-low-level output 45 70 130 ns
S at 0 V or V
CC
, See Figure 6
t
r
Output signal rise time 8 ns
t
f
Output signal fall time 8 ns
S PIN CHARACTERISTICS
over recommended operating conditions including operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
I
IH
High level input current S at 2 V 20 40 70 mA
I
IL
Low level input current S at 0.8 V 5 20 30 mA
VREF PIN CHARACTERISTICS
over recommended operating conditions including operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
O
Reference output voltage –50 mA < I
O
< 50 mA 0.4 V
CC
0.5 V
CC
0.6 V
CC
V
Copyright © 2006–2010, Texas Instruments Incorporated Submit Documentation Feedback 5