Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - transceivers CAN 1/1 SOIC 8

Dominant

Time-Out

Temperature

Protection

V /2

SPLIT

CANH

CANL

Driver

Standby Mode

Wake-Up

Filter

MUX

Output

Logic

Input

Logic

10 µA

30 µA

TXD

STB

RXD

Bus Monitor

SN65HVD1040-Q1

www.ti.com

SLLS753D –FEBRUARY 2007– REVISED AUGUST 2011

EMC-OPTIMIZED CAN TRANSCEIVER

Check for Samples: SN65HVD1040-Q1

FEATURES

APPLICATIONS

• Qualified for Automotive Applications

• GMW3122 Dual-Wire CAN Physical Layer

• Customer-Specific Configuration Control Can • SAE J2284 High-Speed CAN for Automotive

Be Supported Along With Major-Change Applications

Approval

• SAE J1939 Standard Data Bus Interface

• Improved Drop-In Replacement for TJA1040

• ISO 11783 Standard Data Bus Interface

• Meets or Exceeds the Requirements of

• NMEA 2000 Standard Data Bus Interface

ISO 11898-5

• Industrial Automation

• GIFT/ICT Compliant

– DeviceNet™ Data Buses (Vendor ID #806)

• ESD Protection up to ±8 kV (Human-Body

Model) on Bus Pins

DESCRIPTION

• Low-Current Standby Mode With Bus

The SN65HVD1040 meets or exceeds the

Wake-Up, <12 μA Max

specifications of the ISO 11898 standard for use in

applications employing a Controller Area Network

• High Electromagnetic Immunity (EMI)

(CAN). The device is qualified for use in automotive

• Low Electromagnetic Emissions (EME)

applications.

• Bus-Fault Protection of –27 V to 40 V

As a CAN transceiver, this device provides differential

• Dominant Time-Out Function

transmit capability to the bus and differential receive

• Thermal Shutdown Protection

capability to a CAN controller at signaling rates up to

1 megabit per second (Mbps)

(1)

• Power-Up/Down Glitch-Free Bus Inputs and

Outputs

(1) The signaling rate of a line is the number of voltage

– High Input Impedance With Low V

transitions that are made per second, expressed in the units

– Monotonic Outputs During Power Cycling bps (bits per second).

FUNCTIONAL BLOCK DIAGRAM

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2DeviceNet is a trademark of Texas Instruments.

3All other trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (19 pages)

PAGE 1
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.
PAGE 2
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
PAGE 3
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) (2) over operating free-air temperature range (unless otherwise noted) VALUE VCC Supply voltage range –0.
PAGE 4
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.
PAGE 5
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.
PAGE 6
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.
PAGE 7
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION IO(CANH) VO (CANH) TXD II VOD RL VO(CANH) + VO(CANL) 2 STB VI I I(S) VOC I O(CANL) + VI(S) _ V O(CANL) Figure 1. Driver Voltage, Current, and Test Definition Dominant 3.5 V Recessive VO(CANH) 2.5 V VO(CANL) 1.5 V Figure 2. Bus Logic-State Voltage Definitions CANH 330 W ±1% TXD 0V VOD RL + _ STB CANL –2 V £ VTEST £ 7 V 330 W ±1% Figure 3.
PAGE 8
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) CANH RXD VI (CANH) IO VID V + VI (CANL) VIC = I (CANH) 2 VO CANL VI (CANL) Figure 5. Receiver Voltage and Current Definitions 3.5 V CANH VI RXD VI 1.5 V STB 2.4 V IO 1.5 V tPLH CANL (See Note A) 2V CL = 15 pF ±20% (See Note B) VO VO tPHL 0.25 VCC 90% VOH 0.75 VCC 10% VOL tf tr A.
PAGE 9
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com DUT CANH TXD 0V CL VI 60 W ±1% 0.5 VCC 0V CANL STB VI (A) VCC (B) VOH 0.5 VCC VO RXD VOL ten + VO 15 pF ± 20% _ A. CL = 100 pF and includes instrumentation and fixture capacitance within ±20%. B. All VI input pulses are supplied by a generator having the following characteristics: tr or tf ≤ 6 ns, pulse repetition rate (PRR) = 125 kHz, 50% duty cycle. Figure 7.
PAGE 10
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com CANH VCC VI TXD RL = 60 W ±1% CL (B) 0V VOD VI (A) VOD STB VOD(D) 900 mV 500 mV CANL 0V tdom A. All VI input pulses are from 0 V to VCC and supplied by a generator having the following characteristics: tr or tf ≤ 6 ns, pulse repetition rate (PRR) = 500 Hz, 50% duty cycle. B. CL = 100 pF includes instrumentation and fixture capacitance within ±20%. Figure 10.
PAGE 11
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com CANH TXD RL VI VSYM = VO(CANH) + VO(CANL) STB CANL VO(CANL) A. VO(CANH) All VI input pulses are from 0 V to VCC and supplied by a generator having the following characteristics: tr/tf ≤ 6 ns, pulse repetition rate (PRR) = 250 kHz, 50% duty cycle. Figure 13.
PAGE 12
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com Equivalent Input and Output Schematic Diagrams TXD Input RXD Output VCC VCC 15 W 4.3 kW Output Input 6V 6V CANH Input CANL Input VCC VCC 10 kW 10 kW 20 kW 20 kW Input 40 V Input 10 kW 10 kW 40 V STB Input CANH and CANL Outputs VCC VCC CANH 4.
PAGE 13
SN65HVD1040-Q1 SLLS753D – FEBRUARY 2007 – REVISED AUGUST 2011 www.ti.com APPLICATION INFORMATION VBATTERY VCC Vreg (e.g., TLxxxx TPIC7xxx) VSUP VCC VCC 3 STB Port x 7 CANH 8 HVD1040 CAN Transceiver MCU (e.g., TMS470) 5 RXD RXD TXD TXD SPLIT 4 1 6 2 CANL GND Figure 14. Typical Application Using Split Termination for Stabilization VCC HVD1040 3 7 VSPLIT = ½V CC in normal mode, floating in other modes 5 6 CANH SPLIT CANL 2 GND Figure 15.
PAGE 14
PACKAGE OPTION ADDENDUM www.ti.com 10-Nov-2011 PACKAGING INFORMATION Orderable Device SN65HVD1040QDRQ1 Status (1) Package Type Package Drawing ACTIVE SOIC D Pins Package Qty 8 2500 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN65HVD1040QDRQ1 Package Package Pins Type Drawing SOIC D 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 12.4 Pack Materials-Page 1 6.4 B0 (mm) K0 (mm) P1 (mm) 5.2 2.1 8.0 W Pin1 (mm) Quadrant 12.
PAGE 16
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN65HVD1040QDRQ1 SOIC D 8 2500 367.0 367.0 35.
PAGE 17
PAGE 18
PAGE 19
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.