Datasheet

www.ti.com
DRIVER SECTION
Electrical Characteristics
(1)
Switching Characteristics
(1)
ESD Protection
SN65C3232E , , SN75C3232E
3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS
WITH ± 15-kV IEC ESD PROTECTION
SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(2)
MAX UNIT
V
OH
High-level output voltage DOUT at R
L
= 3 k Ω to GND, DIN = GND 5 5.5 V
V
OL
Low-level output voltage DOUT at R
L
= 3 k Ω to GND, DIN = V
CC
– 5 – 5.4 V
I
IH
High-level input current V
I
= V
CC
± 0.01 ± 1 µ A
I
IL
Low-level input current V
I
at GND ± 0.01 ± 1 µ A
V
CC
= 3.6 V, V
O
= 0 V ± 35 ± 60
I
OS
(3)
Short-circuit output current mA
V
CC
= 5.5 V, V
O
= 0 V ± 35 ± 90
r
o
Output resistance V
CC
, V+, and V – = 0 V, V
O
= ± 2 V 300 10M Ω
(1) Test conditions are C1 – C4 = 0.1 µ F at V
CC
= 3.3 V ± 0.3 V; C1 = 0.047 µ F, C2 – C4 = 0.33 µ F at V
CC
= 5 V ± 0.5 V (see Figure 4 ) .
(2) All typical values are at V
CC
= 3.3 V or V
CC
= 5 V, and T
A
= 25 ° C.
(3) Short-circuit durations should be controlled to prevent exceeding the device absolute power dissipation ratings, and not more than one
output should be shorted at a time.
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP
(2)
MAX UNIT
C
L
= 250 pF, V
CC
= 3 V to 4.5 V 1000
Maximum data rate R
L
= 3 k Ω ,
kbit/s
(see Figure 1 ) One DOUT switching
C
L
= 1000 pF, V
CC
= 3.5 V to 5.5 V 1000
t
sk(p)
Pulse skew
(3)
C
L
= 150 pF to 2500 pF, R
L
= 3 k Ω to 7 k Ω , See Figure 2 300 ns
Slew rate,
SR(tr) transition region R
L
= 3 k Ω to 7 k Ω , C
L
= 150 pF to 1000 pF, V
CC
= 3.3 V 14 150 V/ µ s
(see Figure 1 )
(1) Test conditions are C1 – C4 = 0.1 µ F at V
CC
= 3.3 V ± 0.3 V; C1 = 0.047 µ F, C2 – C4 = 0.33 µ F at V
CC
= 5 V ± 0.5 V (see Figure 4 ).
(2) All typical values are at V
CC
= 3.3 V or V
CC
= 5 V, and T
A
= 25 ° C.
(3) Pulse skew is defined as |t
PLH
– t
PHL
| of each channel of the same device.
TERMINAL
TEST CONDITIONS TYP UNIT
NAME NO.
HBM ± 15
DOUT 7, 14 IEC 61000-4-2 Air-Gap Discharge ± 15 kV
IEC 61000-4-2 Contact Discharge ± 8
Copyright © 2005 – 2007, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): SN65C3232E SN75C3232E