Datasheet

EVM Connectors

www.ti.com

5 EVM Connectors

5.1 Description

The SMV512K3EVM is shown below in Figure 11 below.

Figure 11. SMV512K32-CVAL

To provide the user with simple access and maximum flexibility, the SMV512K32-CVAL has four sets of

3-row 16-pin input/output connectors. These are labeled J1 through J4 and J13 through J20. They provide

all of the Input and Output signals for the device.

There are also eight additional Power and Ground banana jack connectors designated as J5 through J12.

The power supply is capable of 800 mA for VDD1, and 300 ma for VDD2. Current clamp levels can be

greatly reduced with lower operating frequencies. See device datasheet electrical characteristics IDD1,

and IDD2 parameters.

The SMV512K32-CVAL connector descriptions are listed in Table 1 below:

SMV512K32-CVAL SRAM Breakout Evaluation Board SLVU571–January 2012

Submit Documentation Feedback