Car Stereo System - Car Radio Digital Signal Processor User Manual

www.ti.com
SM320C6455-EP
FIXED-POINT DIGITAL SIGNAL PROCESSOR
SPRS462B – SEPTEMBER 2007 – REVISED JANUARY 2008
Table 3-9. Peripheral Status Register 0 (PERSTAT0) Field Descriptions (continued)
Bit Field Value Description
17:15 GPIOSTAT GPIO status
000 GPIO is in the disabled state
001 GPIO is in the enabled state
011 GPIO is in the static powerdown state
101 GPIO is in the enable in progress state
Others Reserved
14:12 TIMER1STAT Timer1 status
000 Timer1 is in the disabled state
001 Timer1 is in the enabled state
011 Timer1 is in the static powerdown state
101 Timer1 is in the enable in progress state
Others Reserved
11:9 TIMER0STAT Timer0 status
000 Timer0 is in the disabled state
001 Timer0 is in the enabled state
011 Timer0 is in the static powerdown state
101 Timer0 is in the enable in progress state
Others Reserved
8:6 EMACSTAT EMAC/MDIO status
000 EMAC/MDIO is in the disabled state
001 EMAC/MDIO is in the enabled state
011 EMAC/MDIO is in the static powerdown state
101 EMAC/MDIO is in the enable in progress state
Others Reserved
5:3 VCPSTAT VCP status
000 VCP is in the disabled state
001 VCP is in the enabled state
011 VCP is in the static powerdown state
101 VCP is in the enable in progress state
Others Reserved
2:0 TCPSTAT TCP status
000 TCP is in the disabled state
001 TCP is in the enabled state
011 TCP is in the static powerdown state
101 TCP is in the enable in progress state
Others Reserved
Submit Documentation Feedback Device Configuration 71