Datasheet

DS90UR916Q
SNOSB46E –MARCH 2011–REVISED APRIL 2013 www.ti.com
Deserializer DC Electrical Characteristics
(1)(2)(3)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symb Parameter Conditions Pin/Freq. Units
Min Typ Max
ol
3.3 V I/O LVCMOS DC SPECIFICATIONS – V
DDIO
= 3.0 to 3.6V
V
IH
High Level Input Voltage 2.2 V
DDIO
V
V
IL
Low Level Input Voltage PDB, BISTEN GND 0.8 V
I
IN
Input Current V
IN
= 0V or V
DDIO
−15 ±1 +15 μA
R[7:0], G[7:0],
High Level Output B[7:0], HS, VS,
V
OH
I
OH
= −2 mA, OS_PCLK/DATA = L 2.4 V
DDIO
V
Voltage DE, PCLK, LOCK,
PASS
R[7:0], G[7:0],
Low Level Output B[7:0], HS, VS,
V
OL
I
OL
= +2 mA, OS_PCLK/DATA = L GND 0.4 V
Voltage DE, PCLK, LOCK,
PASS
Output Short Circuit V
DDIO
= 3.3V
PCLK 36 mA
Current V
OUT
= 0V, OS_PCLK/DATA = L/H
I
OS
V
DDIO
= 3.3V
Output Short Circuit
V
OUT
= 0V Des Outputs 37 mA
Current
OS_PCLK/DATA = L/H
TRI-STATE® Output PDB = 0V, OSS_SEL = 0V,
I
OZ
Outputs −15 +15 µA
Current V
OUT
= 0V or V
DDIO
1.8 V I/O LVCMOS DC SPECIFICATIONS – V
DDIO
= 1.71 to 1.89V
V
IH
High Level Input Voltage 1.235 V
DDIO
V
V
IL
Low Level Input Voltage PDB, BISTEN GND 0.595 V
I
IN
Input Current V
IN
= 0V or V
DDIO
−15 ±1 +15 μA
High Level Output V
DDIO
R[7:0], G[7:0],
V
OH
I
OH
= −2 mA, OS_PCLK/DATA = L V
DDIO
V
Voltage − 0.45
B[7:0], HS, VS,
DE, PCLK, LOCK,
Low Level Output
V
OL
I
OL
= +2 mA, OS_PCLK/DATA = L GND 0.45 V
PASS
Voltage
V
DDIO
= 1.8V
Output Short Circuit
V
OUT
= 0V PCLK 18 mA
Current
OS_PCLK/DATA = L/H
I
OS
V
DDIO
= 1.8V
Output Short Circuit
V
OUT
= 0V Des Outputs 18 mA
Current
OS_PCLK/DATA = L/H
TRI-STATE® Output PDB = 0V, OSS_SEL = 0V,
I
OZ
Outputs -15 +15 µA
Current V
OUT
= 0V or V
DDIO
Differential Input
V
TH
+50 mV
Threshold High Voltage
V
CM
= +1.2V (Internal V
BIAS
)
Differential Input
V
TL
−50 mV
Threshold Low Voltage
Common Mode Voltage, RIN+, RIN-
V
CM
1.2 V
Internal V
BIAS
I
IN
Input Current V
IN
= 0V or V
DDIO
-15 +15 µA
Internal Termination
R
T
80 100 120 Ω
Resistor
(1) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
(2) Typical values represent most likely parametric norms at V
DD
= 3.3V, Ta = +25 degC, and at the Recommended Operation Conditions at
the time of product characterization and are not ensured.
(3) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
8 Submit Documentation Feedback Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: DS90UR916Q