Datasheet

17 SERDESUB-21USB User’s Guide SNLU101 – April 2012
JP11: Output Lock Monitor
Reference Description Output = L Output = H JP11
LOCK Receiver PLL LOCK
Note:
DO NOT SHORT
JUMPER IN JP11.
Unlocked Locked
JP10: Output Pass Monitor
Reference Description Output = L Output = H JP10
PASS
PASS (BIST mode)
Note:
DO NOT SHORT
JUMPER IN JP10.
ERROR PASS
JP3, JP2: USB Red and Black wire
Reference Description VDD VSS OPEN
JP3
Power wire in USB cable
thru J2 (and J5 not
mounted) connector
Jumper RED to VSS –
recommended
Note: Normally VDD in USB application
Red wire tied
to VDD
Red wire
tied to VSS
(Default)
Red wire
floating
(not
recommended)
JP2
Power wire in USB cable
thru J2 (and J5 not
mounted) connector
Jumper BLACK to VSS –
recommended
Note: Normally VSS in USB application
Black wire
tied to VDD
Black wire
tied to VSS
(Default)
Black wire
floating
(not
recommended)
NO connect
J2
pin 1
pin 5 BLACK WIRE
mini USB
top side view
(mounted on component side)
RED WIRE
pin 4
pin 3
pin 2
_
+
JP3
JP
3
JP
3
JP
2
JP
2
JP
2