Datasheet

SNLU100 – April 2012 SERDESUB-16USB User’s Guide 29

Note: Please note that the following references are supplied only as a courtesy to our

valued customers. It is not intended to be an endorsement of any particular equipment or

supplier.

Cable References

The FPD-Link III interface cable included in the kit is a standard off-the-shelf high-speed

USB 2.0 with a 4-pin USB A type on one end and a 5-pin mini USB on the other end and is

included for demonstration purposes only.

NOTE: The DS9UB901Q and DS9UB902Q are NOT USB compliant and should not be

plugged into a USB device nor should a USB device be plugged into the demo

boards.

The inclusion of the USB cable in the kit is for:

1) Demonstrating the robustness of the FPD-Link III link over standard twisted pair data

cables.

2) Readily available and in different lengths without having custom cables made.

- For optimal performance, we recommend Shielded Twisted Pair (STP) 100ohm

differential impedance and 24 AWG (or larger diameter) cable for high-speed data

applications.

Leoni Dacar 538 series cable:

www.leoni-automotive-cables.com

Rosenberger HSD connector:

www.rosenberger.de/en/Products/35_Automotive_HSD.php

Equipment References

Corelis CAS-1000-I2C/E I2C Bus Analyzer and Exerciser Products: