Datasheet

SNLU100 – April 2012 SERDESUB-16USB User’s Guide 17
JP5: Output Lock Monitor
Reference Description Output = L Output = H JP5
LOCK Receiver PLL LOCK
Note:
DO NOT SHORT
JUMPER IN JP5.
Unlocked Locked
JP4: Output Pass Monitor
Reference Description Output = L Output = H JP4
PASS
PASS (CRC / BIST modes)
Note:
DO NOT SHORT
JUMPER IN JP4.
ERROR PASS
JP6, JP7: USB Red and Black wire
Reference Description VDD VSS OPEN
JP6
Power wire in USB cable
thru J2 (and J11 not
mounted) connector
Jumper RED to VSS –
recommended
Note: Normally VDD in USB application
Red wire tied
to VDD
Red wire
tied to VSS
(Default)
Red wire
floating
(not
recommended)
JP7
Power wire in USB cable
thru J2 (and J11 not
mounted) connector
Jumper BLACK to VSS –
recommended
Note: Normally VSS in USB application
Black wire
tied to VDD
Black wire
tied to VSS
(Default)
Black wire
floating
(not
recommended)
NO connect
J2
pin 1
pin 5 BLACK WIRE
mini USB
top side view
(mounted on component side)
RED WIRE
pin 4
pin 3
pin 2
_
+
JP6
JP
6
JP
6
JP
7
JP
7
JP
7