Datasheet
SBOA102A
January 2005
Sensor-Emulator-EVM
System Reference Guide
24
These jumpers
must be set to the
position shown to
allow for external
current source
connection.
These three
channels are used
to set the
temperature output
signal in this mode.
The Rtchannels
are not used in this
mode.
Set the jumper
JUMP5 to the
position shown
to connect GND
to the bottom of
the bridge
emulator.
Set the jumper
JUMP1 to the
position shown to
connect the Diode
temperature
emulation.