Datasheet

Software Description

Startup

Make sure all the software has been installed and the hardware is powered on and connected to the PC. Execute

“Analog LaunchPAD” from the start menu. The default start menu location is “Programs\National Semiconductor

Corp\Analog LaunchPAD vx.x.x\Analog LaunchPAD”.

The application should come up in the state shown in Figure 4 below. If it does not, see “Trouble Shooting” at the

end of this document. Click on “LMH0387 – Nano” to select the device and open up the device profile and its

associated tabs.

FIGURE 4. ALP Startup Screen for the LMH0387

Information Tab

The Information tab is shown in Figure 5.

SD387EVK User Guide 6 of 23