Datasheet
SCANSTA112
www.ti.com
SNLS161I –DECEMBER 2002–REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage (V
CC
) −0.3V to +4.0V
DC Input Diode Current (I
IK
) V
I
= −0.5V −20 mA
DC Input Voltage (V
I
) −0.5V to +3.9V
DC Output Diode Current (I
OK
) V
O
= −0.5V −20 mA
DC Output Voltage (V
O
) −0.3V to +3.9V
DC Output Source/Sink Current (I
O
) ±50 mA
DC V
CC
or Ground Current per Output Pin ±50 mA
DC Latchup Source or Sink Current ±300 mA
Junction Temperature (Plastic) +150°C
Storage Temperature −65°C to +150°C
Lead Temperature (Solder, 4sec) 100L NFBGA 220°C
100L TQFP 220°C
Max Package Power Capacity @ 25°C 100L NFBGA 3.57W
100L TQFP 2.11W
Thermal Resistance (θ
JA
) 100L NFBGA 35°C/W
100L TQFP 59.1°C/W
Package Derating above +25°C 100L NFBGA 28.57mW/°C
100L TQFP 16.92mW/°C
ESD Last Passing Voltage (HBM Min) 2500V
(1) Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met,
without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. TI
does not recommend operation of SCAN STA products outside of recommended operation conditions.
RECOMMENDED OPERATING CONDITIONS
Supply Voltage (V
CC
) 'STA112 3.0V to 3.6V
Input Voltage (V
I
) 0V to V
CC
Output Voltage (V
O
) 0V to V
CC
Operating Temperature (T
A
) Industrial −40°C to +85°C
DC ELECTRICAL CHARACTERISTICS
Over recommended operating supply voltage and temperature ranges unless otherwise specified
Symbol Parameter Conditions Min Max Units
V
IH
Minimum High Input Voltage V
OUT
= 0.1V or 2.1 V
V
CC
−0.1V
V
IL
Maximum Low Input Voltage V
OUT
= 0.1V or 0.8 V
V
CC
−0.1V
V
OH
Minimum High Output Voltage I
OUT
= −100 μA V
CC
- 0.2v V
All Outputs and I/O Pins V
IN
= V
IH
or V
IL
V
OH
Minimum High Output Voltage I
OUT
= −12 mA 2.4 V
TDO
B0
, TDO
B1
, TRIST
B0
, TRIST
B1
, Y0
B0
, Y1
B0
, Y0
B1
, All Outputs Loaded
Y1
B1
, TDO
(01-06)
, Y0
01
, Y1
01
, TRIST
(01-03)
V
OH
Minimum High Output Voltage I
OUT
= −24mA 2.2 V
TMS
B0
, TMS
B1
, TCK
B0
, TCK
B1
, TRST
B0
, TRST
B1
,
TMS
(01-06)
, TCK
(01-06)
, TRST
(01-06)
V
OL
Maximum Low Output Voltage I
OUT
= +100 μA 0.2 V
All Outputs and I/O Pins V
IN
= V
IH
or V
IL
Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Links: SCANSTA112