Datasheet

SCANSTA111
SNLS060K –AUGUST 2001–REVISED APRIL 2013 www.ti.com
Figure 5 illustrates how the 'STA111's state-machines interact. The 'STA111-selection state-machine enables or
disables operation of the chip's three port-selection state-machines. In 'STA111s which are selected via Level-1
protocol (either as individual 'STA111s or as members of broadcast or multi-cast groups), Level-2 protocol
commands can be used to park or unpark local scan ports. Note that most transitions of the port-configuration
state-machines are gated by particular states of the 'STA111's TAP-control state-machine, as shown in Figure 4
or Figure 5.
Figure 5. Relationship Between SCANSTA111 State Machines
Following a hardware reset, the TAP controller state-machine is in the Test-Logic-Reset (TLR) state; the
'STA111-selection state-machine is in the Wait-For-Address state; and each of the three port-selection state-
machines is in the Parked-TLR state. The 'STA111 is then ready to receive Level-1 protocol, followed by Level-2
protocol.
8 Submit Documentation Feedback Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: SCANSTA111