Datasheet

SCANSTA111
SNLS060K –AUGUST 2001–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage (V
CC
) −0.3V to +4.0V
DC Input Diode Current (I
IK
) V
I
= −0.5V −20 mA
DC Input Voltage (V
I
) −0.5V to +3.9V
DC Output Diode Current (I
OK
) V
O
= −0.5V −20 mA
DC Output Voltage (V
O
) −0.3V to +3.9V
DC Output Source/Sink Current (I
O
) ±50 mA
DC V
CC
or Ground Current per Output Pin ±50 mA
DC Latchup Source or Sink Current ±300 mA
Junction Temperature (Plastic) +150°C
Storage Temperature −65°C to +150°C
Lead Temperature (Solder, 4sec) 49L BGA 235°C
48L TSSOP 260°C
Max Pkg Power Capacity @ 25°C 49L BGA 1.47 W
48L TSSOP 1.47 W
Thermal Resistance (θ
JA
) 49L BGA 85°C/W
48L TSSOP 85°C/W
Package Derating 11.8 mW/°C above 25°C
ESD Last Passing Voltage (Min) I/O 2000V
Inputs 1000V
(1) Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met,
without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables.
Texas Instruments does not recommend operation of SCAN STA products outside of recommended operation conditions.
RECOMMENDED OPERATING CONDITIONS
Supply Voltage (V
CC
) 'STA111 3.0V to 3.6V
Input Voltage (V
I
) 0V to V
CC
Output Voltage (V
O
) 0V to V
CC
Operating Temperature (T
A
) Industrial −40°C to +85°C
DC ELECTRICAL CHARACTERISTICS
Over recommended operating supply voltage and temperature ranges unless otherwise specified
Symbol Parameter Conditions Min Max Units
V
IH
Minimum High Input Voltage V
OUT
= 0.1V or V
CC
−0.1V 2.1 V
V
IL
Maximum Low Input Voltage V
OUT
= 0.1V or 0.8 V
V
CC
−0.1V
V
OH
Minimum High Output Voltage I
OUT
= −100 μA V
CC
- 0.2v V
(TDO
B
, TCK
(0-2)
, TMS
(0-2)
, TDO
(0-2)
, Y
(0-1)
) V
IN
(TDI
B
, TMS
B
, TCK
B
) = V
IH
V
OH
Minimum High Output Voltage I
OUT
= −24 mA, V
IN
on S
(0-6)
and 2.2 V
(TDO
B
, TCK
(0-2)
, TMS
(0-2)
, TDO
(0-2)
, Y
(0-1)
, Y
B
, TDl
(0-2)
= V
IH
,
TRST
(0-2)
) V
IL
All Outputs Loaded
V
OH
Minimum High Output Voltage I
OUT
= −100μA V
CC
- 0.2v V
(TRIST
B
, TRIST
(0-2)
, Y
B
)
V
OH
Minimum High Output Voltage I
OUT
= −12mA. 2.4 V
(TRIST
B
, TRIST
(0-2)
, LSP_ACTIVE
(0-2)
) All Outputs Loaded
V
OL
Maximum Low Output Voltage I
OUT
= +100 μA, V
IN
(TDI
B
, 0.2 V
(TDO
B
, TCK
(0-2)
, TMS
(0-2)
, TDO
(0-2)
, Y
(0-1)
) TMS
B
, TCK
B
) = V
IL
V
OL
Maximum Low Output Voltage I
OUT
= +24 mA, V
IN
on S
(0–6)
and 0.55 V
(TDO
B
, TCK
(0-2)
, TMS
(0-2)
, TDO
(0-2)
, Y
(0-1)
, Y
B
, TDI
(0-2)
= V
IH
,
TRST
(0-2)
) V
IL
, All Outputs Loaded
26 Submit Documentation Feedback Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: SCANSTA111