Datasheet

SCAN921025H, SCAN921226H
SNLS185C –OCTOBER 2004–REVISED MAY 2013 www.ti.com
DIN8 Held Low-DIN9 Held High Creates an RMT Pattern
Figure 2. RMT Patterns Seen on the Bus LVDS Serial Output
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)
Supply Voltage (V
CC
) −0.3V to +4V
LVCMOS/LVTTL Input Voltage −0.3V to (V
CC
+0.3V)
LVCMOS/LVTTL Output Voltage −0.3V to (V
CC
+0.3V)
Bus LVDS Receiver Input Voltage −0.3V to +3.9V
Bus LVDS Driver Output Voltage −0.3V to +3.9V
Bus LVDS Output Short Circuit Duration 10mS
Junction Temperature +150°C
Storage Temperature −65°C to +150°C
Lead Temperature (Soldering, 4 seconds) +220°C
Maximum Package Power Dissipation Capacity
49L NFBGA 1.47 W
@ 25°C Package:
Package Derating: 49L NFBGA 11.8 mW/°C above +25°C
θ
ja
85°C/W
HBM >2kV
ESD Rating
MM > 250V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. The table of Electrical Characteristics specifies conditions of device operation.
Recommended Operating Conditions
Min Nom Max Units
Supply Voltage (V
CC
) 3.0 3.3 3.6 V
Operating Free Air Temperature (T
A
) −40 +25 +125 °C
Receiver Input Range 0 2.4 V
Supply Noise Voltage (V
CC
) 100 mV
P-P
6 Submit Documentation Feedback Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: SCAN921025H SCAN921226H