Reference Guide

19
May ’01 Chapter 3. Installation
Figure 3: Reader Mounting Holes
The tolerances for the position of the mounting holes is ± 0.5 mm.
Note:
Detuning of the antenna can result in additional heat being generated
in the reader. If this happens the reader regulates its output power
down until the final stage is once again within its upper temperature
limit.
150,00 mm 160,00 mm
100 mm
110 mm
120 mm
ø 4,5 mmø 4,5 mm
ø 4,5 mm ø 4,5 mm