Reference Guide

16
S6500 Long Range Reader Module - Reference Guide May ’01
2.5 Switches
There are two switches on the reader. Their location is shown in Figure 2 and their
function is described in Table 15.
Table 15: Description of Switches
Name Description
S1 Reset button
S2
1 - Setting data bus addresses (0 ... 7)
2 - Setting data bus addresses (0 ... 7)
3 - Setting data bus addresses (0 ... 7)
4 - not used
Note:
In order to set the bus address using S2, the reader must be set to
software address “0" (default factory setting).