User's Manual

TI PROPRIETARY T E X A S I N S T R U M E N T S
INFORMATION -
Revision:
INTERNAL DATA R F I D SYSTEMS
00
S P E C I F I C A T I O N
User Guide Test Control Software
S4110 MFR Evaluation Kit
Page 6 of 15 XX-XX-XX-XXX
Printed copies are not controlled documents - verify the correct revision before use.
2) Click on ‘Connect’ button to open the COM port. You’ll see the
red indicator box with ‘COM Closed’ text change color to GREEN
and read ‘COM Opened
’ for successful connection.
3) If red indicator box stays red and reads ‘Com Closed’, the COM
port did not open successfully.
Figure 6: Com Port Choices supported
3.3 Turn On HF Transmitter
To Turn on the HF Transmitter:
1) Select 14443A Library folder Tab
2) Under 14443A Library folder Tab select Transmitter On
3) Click on ‘Execute’ button to issue a HF- Transmitter ON Command.
4) If successful, you would see the Green indicator with ‘TRANSMITTER
ON – 14443A’ text.
Use Com Port Selec
t
Arrow to select
desired Com Port