User's Manual

TI PROPRIETARY T E X A S I N S T R U M E N T S
INFORMATION -
Revision:
INTERNAL DATA R F I D SYSTEMS
00
S P E C I F I C A T I O N
User Guide Test Control Software
S4110 MFR Evaluation Kit
Page 12 of 15 XX-XX-XX-XXX
Printed copies are not controlled documents - verify the correct revision before use.
3.7 Close Com Port
1) Close the COM port by clicking on ‘Disconnect’ button.
2)
You will see the Green Status Indicator with ‘COM Open’ text,
change color to RED with a text change to ‘Com Closed to indicate
successful closure of the COM port.
Figure 14: Com Port Closure
Press “Disconnect”
Button to Close
‘Com Port’