Datasheet

Layout of the EVM
2-3
EVM Description
2.2 Layout of the EVM
Figure 2–2 shows the placement of the components of the EVM. The
components are only placed on the top layer of the board, and the board is
routed with a single layer of metal. The size of the EVM is 2 inches x 2 inches.
The total space required for the IC and the capacitors on the EVM is only about
0.08 in
2
(approximately 52 mm
2
). The capacitors are optimized for space and
performance and have been laid out for 0805 sized pads.
Figure 2–2. Layout of the EVM
Figure 2–3 shows the metal layer of the board.
Figure 2–3. Metal Layer