Datasheet
ABSOLUTE MAXIMUM RATINGS
(1)
REG710
SBAS221G – DECEMBER 2001 – REVISED JANUARY 2009 ...........................................................................................................................................
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
SPECIFIED
OUTPUT PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT VOLTAGE PACKAGE-LEAD DESIGNATOR RANGE MARKING
(2)
NUMBER MEDIA, QUANTITY
5.5V Output
REG71055DDCT Tape and Reel, 250
REG71055DDC 5.5V TSOT23-6 DDC – 40 ° C to +85 ° C R10H
Tape and Reel,
REG71055DDCR
3000
5V Output
REG710NA-5/250 Tape and Reel, 250
REG710NA-5 5.0V SOT23-6 DBV – 40 ° C to +85 ° C R10B
Tape and Reel,
REG710NA − 5/3K
3000
REG71050DDCT Tape and Reel, 250
REG71050DDC 5.0V TSOT23-6 DDC – 40 ° C to +85 ° C GAAI
Tape and Reel,
REG71050DDCR
3000
REG71050DRVT Tape and Reel, 250
REG71050DRV 5.0V TQFN-6 DRV – 40 ° C to +85 ° C CFF
Tape and Reel,
REG71050DRVR
3000
3.3V Output
REG710NA-3.3/250 Tape and Reel, 250
REG710NA-3.3 3.3V SOT23-6 DBV – 40 ° C to +85 ° C R10C
Tape and Reel,
REG710NA-3.3/3K
3000
3V Output
REG710NA-3/250 Tape and Reel, 250
REG710NA-3 3.0V SOT23-6 DBV – 40 ° C to +85 ° C R10D
Tape and Reel,
REG710NA-3/3K
3000
2.7V Output
REG710NA-2.7/250 Tape and Reel, 250
REG710NA-2.7 2.7V SOT23-6 DBV – 40 ° C to +85 ° C R10F
Tape and Reel,
REG710NA-2.7/3K
3000
2.5V Output
REG710NA-2.5/250 Tape and Reel, 250
REG710NA-2.5 2.5V SOT23-6 DBV – 40 ° C to +85 ° C R10G
Tape and Reel,
REG710NA-2.5/3K
3000
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
(2) Voltage is marked on reel. Add on row with the following data: Product: REG71050DRV Output Voltage: 5.0V Package-Lead: TQFN
Package Designator: DRV Specified Temp range: -40C to +85C Package marking: CFF Ordering Number: REG71050DRVT (Tape and
Reel, 250) REG71050DRVR (Tape and Reel, 3000)
REG710 UNIT
Supply voltage – 0.3 to +6.0 V
Enable input – 0.3 to V
IN
V
Output short-circuit duration Indefinite
Operating temperature range – 55 to +125 ° C
Storage temperature range – 65 to +150 ° C
Junction temperature – 55 to +150 ° C
Lead temperature (soldering, 10s) +260 ° C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
2 Submit Documentation Feedback Copyright © 2001 – 2009, Texas Instruments Incorporated
Product Folder Link(s): REG710