Datasheet

REF3212, REF3220
REF3225, REF3230
REF3233, REF3240
SBVS058C –JUNE 2005– REVISED AUGUST 2011 www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
Boldface limits apply over the listed temperature range.
At T
A
= +25°C, I
LOAD
= 0mA, and V
IN
= 5V, unless otherwise noted.
REF32xx
PARAMETER CONDITIONS MIN TYP MAX UNIT
REF3212 / REF3220 / REF3225 / REF3230 / REF3233 / REF3240
OUTPUT VOLTAGE TEMP
dV
OUT
/dT
DRIFT
0°C ≤ T
A
≤ +125°C 4 7 ppm/°C
–40°C ≤ T
A
≤ +125°C 10.5 20 ppm/°C
LONG-TERM STABILITY 0 to 1000h 55 ppm
LINE REGULATION V
OUT
+ 0.05
(1)
≤ V
IN
≤ 5.5V –65 15 +65 ppm/V
LOAD REGULATION
(2)
dV
OUT
/dI
LOAD
Sourcing 0mA < I
LOAD
< 10mA, V
IN
= V
OUT
+ 250mV
(1)
–40 3 40 µV/mA
Sinking –10mA < I
LOAD
< 0mA, V
IN
= V
OUT
+ 100mV
(1)
–60 20 60 µV/mA
THERMAL HYSTERESIS
(3)
dT
First cycle 100 ppm
Additional cycles 25 ppm
DROPOUT VOLTAGE
(1)
V
IN
– V
OUT
0°C ≤ T
A
≤ +125°C 5 50 mV
OUTPUT CURRENT I
LOAD
V
IN
= V
OUT
+ 250mV
(1)
–10 10 mA
SHORT-CIRCUIT CURRENT I
SC
Sourcing 50 mA
Sinking 40 mA
TURN-ON SETTLING TIME To 0.1% at V
IN
= 5V with C
L
= 0 60 µs
ENABLE/SHUTDOWN
(4)
V
L
Reference in Shutdown mode 0 0.7 V
V
H
Reference is active 1.5 V
IN
V
POWER SUPPLY I
L
= 0
Voltage V
IN
V
OUT
+ 0.05
(1)
5.5 V
Current I
Q
ENABLE > 1.5V 100 120 µA
.. Over temperature 0°C ≤ T
A
≤ +125°C 115 135 µA
Shutdown I
S
ENABLE < 0.7V 0.1 1 µA
TEMPERATURE RANGE
Specified –40 +125 °C
Operating –55 +135 °C
Storage –65 +150 °C
Thermal resistance, SOT23-6 θ
JA
200 °C/W
(1) The minimum supply voltage for the REF3212 is 1.8V.
(2) Load regulation is using force and sense lines; see the Load Regulation section for more information.
(3) Thermal hysteresis procedure is explained in more detail in the Applications Information TBD section.
(4) If the rise time of the input voltage is less than or equal to 2ms, the ENABLE and IN pins can be tied together. For rise times greater
than 2ms, see the Supply Voltage section.
4 Copyright © 2005–2011, Texas Instruments Incorporated